Masonry Groove in the Elevation

Date:               xxx

Ref:                  xxx

Kind Attn         :Mr. xxx

Project             :2B + G + 14 + Lower Roof Hotel Building on Plot No. xxx at Al Barsha

1st, Dubai U.A.E.

Subject            : Regarding Masonry Groove in the Elevation

Dear Sir,

With reference to the above , there is a masonary groove shown in the elevation and we are hereby intimating you that kindly provide us the groove size with maximum 10mm depth and please note the following:

1. In our scope, it is a masonary groove and this groove we can cut after plaster .This is one option or we can create during the plaster.

• The manual groove will not be fair finish with smooth edge .So, kindly advise, do you required the metallic or PVC groove to maintain the quality of the groove line and fair finish edges that may be PVC, Aluminium or Stainless Steel.

• Our suggestion that readymade groove will appear in straight line and level perfect and there will be variation minimum with PVC and litlte more with metallic.

So, kindly review and advise, can we proceed with the masonary groove or you required PVC/ metallic one.

Regards,

For xxx Contracting L.L.C.

xxx

Project Manager