Method Statement Title: Testing and Commissioning of Public Address System
1.0 Scope
This method statement details the method of Testing and commissioning of Public Address System.
Note
A separate Method Statement Ref. ETA/MS/E- shall be submitted for Installation of
the Public Address System.
2.0 Material
- All materials shall be as per approved material submittals .
- Size and Type of cable shall be as per approved shop drawings / system manufacturers recommendation.
2.3 Speakers shall be as per approved shop drawing.
3.0 Applicable Location
Tower E1,E2,E3,W1,W2,W3,(Public Areas)
4.0 Method
Find attached the manufacturer representative’s detailed method statement and test formats for testing and commissioning of Public Address System covering the mechanical checks, switching ON the unit. Programming and testing
The whole system will be commissioned and certified by the manufacturer’s representative before handing over.
5.0 Records
5.1 Commissioning procedure with test results in attached format.
5.2 Inspection request duly signed-off by NMX and Consultant.
5.3 Certification of installation by SIBCA
6.0 Attachment
6.1 Manufacturer’s representative method statement detailing the pre-commissioning and commissioning procedures, including test formats
