Method of Statement of plaster works with step by step details and procedure.

The method statement for plastering works includes the following steps:

1. Preparation: Before starting the plastering work, the surface to be plastered must be prepared. This involves cleaning the surface of any dust, debris, and loose materials, and repairing any cracks or defects.
2. Mixing the Plaster: The plaster should be mixed to the correct consistency, following the manufacturer’s instructions. The plaster should be mixed in a mechanical mixer or by hand.
3. Applying the Scratch Coat: The first coat of plaster, known as the scratch coat, should be applied evenly to the surface. The scratch coat should be rough and not smooth, and should be left to set for 24 hours.
4. Applying the Brown Coat: The second coat of plaster, known as the brown coat, should be applied evenly to the surface. The brown coat should be slightly smoother than the scratch coat and should be left to set for 24 hours.
5. Finishing: The final coat of plaster, known as the finish coat, should be applied evenly to the surface. The finish coat should be smooth and even and should be left to set for 24 hours.
6. Sanding: After the finish coat has set, the surface should be sanded to remove any rough areas and to achieve a smooth and even surface.
7. Painting: Once the plastering work is complete, the surface should be painted with the specified paint.
8. Inspection: After the painting is complete, the plastering work should be inspected to ensure that it meets the specified requirements and that there are no defects.

It is important to follow these steps carefully and in the correct order to ensure the proper plastering of the surface. It is also recommended to have a competent person supervise the plastering process and to ensure that all workers follow proper safety procedures.