Method Statement for HVAC Piping Installation Work Contents This procedure defines the method used to ensure that the HVAC piping system Installation comprising all pipes, tubes, valves, fittings, reducers, expanders, nipples, Vents, anchors, brackets, sleeves and all accessories, components connected thereto as An integrated part of the HVAC piping system to be correct and acceptable and Conform to the contract […]
METHOD STATEMENT FOR Drainage Piping System CONTENTS CONTENTS…………………………………………………………………………………………………………. 1.0 Scope……………………………………………………………………………………………………. 3 2.0 REFERENCES……………………………………………………………………………………………………………………………………………………………..3 3.0 Responsibilities………………………………………………………………………………… 3 4.0 SEQUENCING………………………………………………………………………………………….. 4 5.0 CONSTRUCTION PROCEDURES……………………………………………………………… 4 6.0 TESTING………………………………………………………………………………………………… 5 7.0 EQUPMENT.……………………………………………………………………………………………………………………………………..5 8.0 Materials……………………………………………………………………………………………. 5 9.0 Environmental Considerations…………………………………………………… 6 10.0 Attachments……………………………………………………………………………………… 6 Attachment 1: Key to Safety Symbols…………………………………………………………………………….. 7 This method statment describe the specfic safe working method which will be use by Orasccom […]
METHOD STATEMENT FOR INSTALLATION AND INSPECTION OF FIRE FIGHTING SYSTEM TABLE OF CONTENTS 1. REVISION RECORD.. 3 2. SCOPE.. 4 3. PURPOSE.. 4 4. REFERENCES.. 4 4.1. Contract documents. 4 4.2. Contractors Submittal Error! Bookmark not defined. 5. DEFINITIONS / ABBREVIATIONS.. 4 5.1. Definition. 4 5.2. Abbreviations. 5 6. QUALITY CONTROL. 5 7. EQUIPMENTS/ TOOLS / MANPOWER/MATERIALS.. 5 7.1. Materials […]
METHOD STATEMENT FOR (PPR) Water Supply System CONTENTS CONTENTS…………………………………………………………………………………………………………. 1.0 Scope……………………………………………………………………………………………………. 3 2.0 REFERENCES…………………………………………………………………………………………………………………………………………………………..3. 3.0 Responsibilities………………………………………………………………………………… 3 4.0 SEQUENCING………………………………………………………………………………………….. 3 5.0 CONSTRUCTION PROCEDURES……………………………………………………………… 4 6.0 TESTING………………………………………………………………………………………………… 5 7.0 EQUPMENT.………………………………………………………………………………………………………………………………………5 8.0 Materials……………………………………………………………………………………………. 5 9.0 Environmental Considerations…………………………………………………… 6 10.0 Attachments……………………………………………………………………………………… 6 Attachment 1: Key to Safety Symbols…………………………………………………………………………….. 7 This method statement describe the specific safe working method which will be use by […]
Method Statement Title: Testing & Commissioning of Domestic Water Pumps Scope The scope of this Method Statement is to define the method of Testing and Commissioning of Domestic Water Pumps installed within the Burj Dubai – The Residences, in accordance with the manufacturer’s instructions attached. Note a. For installation of Domestic Water Pumps refer to Method Statement Ref. ETA/MS/P-006. […]
Method Statement Title: Testing & Commissioning of Fire Protection System Scope : This scope of this method statement covers the testing and commissioning of sprinklers and Wet Riser system within the Burj Dubai – The Residences in accordance with the following. Note: Method statement for the startup and commissioning of fire pump set will be covered under a separate submittal […]
Method Statement Title: Start-up and Commissioning of Fire Water Pumps Scope The scope of this Method Statement is to define the method of Start-up and Commissioning of Fire Water Pumps installed within Burj Dubai – The Residences, in accordance with the Specification Sections 15500 applicable NFPA and manufacturer’s instructions attached. Note 2.0 Material Refer to Appendix 1 – […]
Method Statement Title: Start up & Commissioning of Sump Pumps Scope The scope of this Method Statement is to define the method of Start-up and Commissioning of Sump Pumps installed within the Burj Dubai – The Residences, in accordance with the Specification Sections 15440 manufacturer’s instructions attached. Note a. For installation of Sump Pumps refer to Method Statement Ref. […]
Method Statement Title: Installation of Wet Riser Piping Scope : This method statement is applicable to the installation of Wet Riser Pipes and Hose reels, related fittings and accessories, to ensure that the pipe work and other related fittings and accessories are properly installed and conforms to the requirement of contract specification Section 15500 and NFPA 14. 2.0 Purpose […]
Method Statement Title: Installation of Water Heaters Scope 1.1 This method statement applies to installation of water heaters as approved. 2.0 Purpose 2.1 Purpose of this method statement is to outline the method of storage, handling and installation of water heaters and pertaining accessories. 3.0 Material 3.1 Ceiling mounted water heaters 3.2 Pressure and temperature relief (P&T) valves […]