Engineering Letters Sample, Correspondence, Method of Statements, Submittals, Extension of Time Claim (EOT), HSE Policy, QA/QC Policy, Variation Order Request, FIDIC Red Book, Contract Agreement, Subcontractor Nomination, Provisional Sum Item, Prime Cost Items.
Method Statement Title: Start-up and Commissioning of Fire Water Pumps Scope The scope of this Method Statement is to define the method of Start-up and Commissioning of Fire Water Pumps installed within Burj Dubai – The Residences, in accordance with the Specification Sections 15500 applicable NFPA and manufacturer’s instructions attached. Note 2.0 Material Refer to Appendix 1 – […]
Method Statement Title: Start up & Commissioning of Sump Pumps Scope The scope of this Method Statement is to define the method of Start-up and Commissioning of Sump Pumps installed within the Burj Dubai – The Residences, in accordance with the Specification Sections 15440 manufacturer’s instructions attached. Note a. For installation of Sump Pumps refer to Method Statement Ref. […]
Method Statement Title: Installation of Wet Riser Piping Scope : This method statement is applicable to the installation of Wet Riser Pipes and Hose reels, related fittings and accessories, to ensure that the pipe work and other related fittings and accessories are properly installed and conforms to the requirement of contract specification Section 15500 and NFPA 14. 2.0 Purpose […]
Method Statement Title: Installation of Water Heaters Scope 1.1 This method statement applies to installation of water heaters as approved. 2.0 Purpose 2.1 Purpose of this method statement is to outline the method of storage, handling and installation of water heaters and pertaining accessories. 3.0 Material 3.1 Ceiling mounted water heaters 3.2 Pressure and temperature relief (P&T) valves […]
Method Statement Title: Installation of Sump Pumps Note A separate method statement Ref.ETA/MS/P-012 will be submitted for start-up and commissioning of sump pumps. 10.1 Installation checklist.
Method Statement Title: Installation of Sprinkler Piping System Scope The scope of this method statement is to describe the method of installation of sprinkler piping system in Burj Dubai – The Residences Project in accordance with the project specifications. Note a. Installation of stand pipes and fire hose reels is covered under a separate method statement Ref. ETA/MS/P-05 b. […]
Method Statement Title: Installation of Fire Water Pumps Note A separate method statement Ref. ETA/MS/P-015 will be submitted for Start-up & Commissioning of Fire Water Pumps. 4.0 Applicable Location 4.1 West Tower – W2 Basement Floor. 5.0 Method 5.1 Receiving 5.1.1 When received at site, each pump, valves, air vent, pressure relief valve and water meter shall be […]
Method Statement Title: Installation of Domestic Water Pumps (Transfer and Booster Pumps) Note A separate method statement Ref.ETA/MS/P-13 will be submitted for Start-up and Commissioning of Domestic Water Pumps. 10.1. Installation check list reference
Method Statement Title: Installation & Testing of Underground Drainage Piping 1.0 Scope 1.1 This method statement details the method for installation and hydrostatic testing of underground drainage piping. 2.0 Material 2.1 UPVC Pipes to EN1401-1 (Formerly BS 4660) with push-fit grooved joints. 3.0 Applicable Location East and West Podium – Basement level. 4.0 Method 4.1 Storage 4.1.2 […]
Method Statement Title: Installation & Testing of Domestic Water Piping System 1.0 Scope The scope of this method statement is to detail the method of installation and hydrostatic pressure testing of Domestic Water Piping System. Note The chlorination and disinfections of the system shall be covered under a separate method statement Ref. ETA/MS/P-016. 2.0 Material 3.0 Applicable Location […]