A U-groove joint is a type of groove joint where a U-shaped groove is created on the edges of two members to be joined. The edges are then welded together, resulting in a U-shaped weld bead. This joint is commonly used when increased volume for weld metal is required, resulting in higher strength and better […]
A V-groove joint is a type of groove joint where a V-shaped groove is created on the edges of two members to be joined. The edges are then welded together, resulting in a V-shaped weld bead. This joint is commonly used when a deep penetration weld is required, allowing for better access and fusion between
A square groove joint is a type of groove joint where a rectangular groove is created on the edges of two members to be joined. The edges are then welded together, resulting in a square or rectangular weld bead. This type of joint is commonly used in structural applications where high strength and load-bearing capacity
Groove joints are a type of welded joint where the two members to be joined have a groove or recess created in their edges. The groove provides a space for the weld metal to fill and bond the two members together. Groove joints are commonly used when high strength and full penetration welds are required.
A flat fillet joint is a type of fillet joint where the weld forms a flat surface along the junction between two members that are joined at an angle, typically a 90-degree angle. The weld is evenly distributed and flush with the surface of the members. This type of joint provides a clean appearance and
A convex fillet joint is a type of fillet joint where the weld forms a convex curve between two members that are joined at an angle, typically a 90-degree angle. This type of joint provides good weld penetration and is easier to inspect for quality. Here is a step-by-step procedure to create a convex fillet
A concave fillet joint is a type of fillet joint where the weld forms a concave curve between two members that are joined at an angle, typically a 90-degree angle. This type of joint provides increased weld strength due to the larger volume of weld metal. Here is a step-by-step procedure to create a concave
Fillet joints are a type of welded joint where two members are joined together at an angle, typically a 90-degree angle, with a curved transition. The curved transition, called a fillet, is formed by welding along the junction between the two members. Fillet joints are versatile and commonly used in various applications due to their
A corner seam joint is a type of corner joint where two members meet at a 90-degree angle, and a continuous weld is made along the inside of the joint, along the corner. This type of joint creates a seamless connection and is often used when a smooth and uninterrupted joint is desired. Here is
A half-mitre corner joint is a type of corner joint where two members meet at a 90-degree angle with each member having a 45-degree angle cut at their ends. When the members are brought together, the angled ends create a mitered joint. This joint provides a clean and aesthetically pleasing connection between the members. Here
