Method of Statement

METHOD OF STATEMENT FOR WATER SUPPLY PIPE INSTALLATION INSIDE THE TOILET a-1. Select and follow manufacturers recommendations for types of solvent cement for such conditions as temperature over 100ºF (38ºC), humidity over 60% or use of schedule 80 fittings. a-2. Proper handling of solvent cement should be strictly done to maintain effectiveness. a-3. Keep solvent […]

METHOD OF STATEMENT OF UNDERGROUND PIPE INSTALLATION Summary:   This Method of Statement includes all the underground sewer                               pipe installation. 1. Procedure

METHOD OF STATEMENT  FOR ROOF WATER TANK INSTALLATION 6.1       Prepare the tank for installation having all necessary fittings and   connectors for inlet, outlet, air breather and other tank accessories. 6.2       Connect water piping to roof water storage tank with unions or adaptors and shutoff valves for both tank supply line and fixture supply line.

1. Procedure 3mm galvanized steel wire will be provided inside empty ducts, the future pulling of cables, extending 1m beyond duct banks at both ends.

METHOD OF STATEMENT FOR DRAINAGE PIPE INSTALLATION INSIDE THE TOILET Toilet details and mechanical pipe sleeves location for both indoor unit refrigeration pipes and sanitary fixtures ventilation. Block work (except the shaft walls) and water proofing activity should be done first before installation.

EQUIPMENT AND TOOLS:- 1.       Megger Instrument shall be having valid calibration. 2.       Megger-with range 500V/1000V shall be used for conducting the test.           Megger range 500 V shall be used for Wire testing           Megger range 1000 V shall be used for Cable testing PRE – TEST PREPARATION:- 1.    The leads used for connecting megger

TABLE OF CONTENTS     1.0    Revision Status   Revision No Date Prepared By Reviewed By Arabtech Approved   Revision Description     0 5/10/04     S.Georgiou   C.Ctorides   G.Georghiou M.Pickup       1 6/07/04     S.Georgiou   C.Ctorides   G.Georghiou M.Pickup       2 26/09/04     S.Georgiou  

TABLE OF CONTENTS     1.0    Revision Status   Revision No Date Prepared By Reviewed By Arabtech Approved   Revision Description     0 15/11/04     S.Georgiou   C.Ctorides   G.Georghiou M.Pickup       1 15/12/04     S.Georgiou   C.Ctorides   G.Georghiou M.Pickup       2 20/03/05     S.Georgiou  

TABLE OF CONTENTS a. Safety Rules during testingb. Safety lightingc. Task lightingd. Emergency arrangements• General• Fire Precautions• Communicatione. Risks Control• Hazards/Risks• 3rd Party Protection• Environmental Considerations a. Generalb. Personnel Protective Equipmentc. Power 1.0 Revision StatusRevisionNo Date PreparedBy ReviewedBy Arabtech ApprovedRevisionDescription 010 April 05D.SAVVA S.GEORGIOU K.MARNERIDESM.PICKUPFirst submission 1.0 SCOPE / OBJECTIVE This method statement covers the