A J-groove joint is a type of groove joint where a J-shaped groove is created on the edges of two members to be joined. The edges are then welded together, resulting in a J-shaped weld bead. This joint is commonly used when a thicker weld is required on one side of the joint while maintaining a minimal weld on the […]
A U-groove joint is a type of groove joint where a U-shaped groove is created on the edges of two members to be joined. The edges are then welded together, resulting in a U-shaped weld bead. This joint is commonly used when increased volume for weld metal is required, resulting in higher strength and better penetration. Here is a step-by-step […]
A V-groove joint is a type of groove joint where a V-shaped groove is created on the edges of two members to be joined. The edges are then welded together, resulting in a V-shaped weld bead. This joint is commonly used when a deep penetration weld is required, allowing for better access and fusion between the weld metal and the […]
A square groove joint is a type of groove joint where a rectangular groove is created on the edges of two members to be joined. The edges are then welded together, resulting in a square or rectangular weld bead. This type of joint is commonly used in structural applications where high strength and load-bearing capacity are required. Here is a […]
Groove joints are a type of welded joint where the two members to be joined have a groove or recess created in their edges. The groove provides a space for the weld metal to fill and bond the two members together. Groove joints are commonly used when high strength and full penetration welds are required. There are several types of […]
A flat fillet joint is a type of fillet joint where the weld forms a flat surface along the junction between two members that are joined at an angle, typically a 90-degree angle. The weld is evenly distributed and flush with the surface of the members. This type of joint provides a clean appearance and minimal protrusion. Here is a […]
A convex fillet joint is a type of fillet joint where the weld forms a convex curve between two members that are joined at an angle, typically a 90-degree angle. This type of joint provides good weld penetration and is easier to inspect for quality. Here is a step-by-step procedure to create a convex fillet joint: Example Application: Convex fillet […]
A concave fillet joint is a type of fillet joint where the weld forms a concave curve between two members that are joined at an angle, typically a 90-degree angle. This type of joint provides increased weld strength due to the larger volume of weld metal. Here is a step-by-step procedure to create a concave fillet joint: Example Application: Concave […]
Fillet joints are a type of welded joint where two members are joined together at an angle, typically a 90-degree angle, with a curved transition. The curved transition, called a fillet, is formed by welding along the junction between the two members. Fillet joints are versatile and commonly used in various applications due to their simplicity and effectiveness. There are […]
A corner seam joint is a type of corner joint where two members meet at a 90-degree angle, and a continuous weld is made along the inside of the joint, along the corner. This type of joint creates a seamless connection and is often used when a smooth and uninterrupted joint is desired. Here is a step-by-step procedure to create […]