Method Statement Title: Installation of Air Inlets and Outlets Towers E1, E2, E3, W1, W2, W3, Podiums and Villas. Air Inlets/Outlets – Installed on false ceiling Air Inlets/Outlets – Installed on Wall
Method Statement Title: Installation and testing of Chilled Water Piping (Pre-insulated) 1.0 Scope : 2.0 Purpose : 3.0 Material : ERW, black steel, SCH 40, Grade ‘B’ Fabricated MI fittings, grooved ends. Fabricated MS structured supports. (Sketch enclosed) 4.0 Method : Floor piping test pressure : 15 Bar Risers (Low & High) and trench piping : […]
Method Statement Title: Installation and testing of Chilled Water Piping 1.0 Scope : 2.0 Purpose : 3.0 Material : ERW, black steel, SCH 40, Grade ‘B’ Upto 50mm dia. MI fittings, Black, threaded ends 65mm dia and above – Steel Butt welding type/Grooved coupling joint type. Upto 50mm : Threaded ends 65mm and above : Flanged ends […]
Method Statement Title: Installation and testing of Chilled Water Piping (Pre-insulated) 1.0 Scope : 2.0 Purpose : 3.0 Material : ERW, black steel, SCH 40, Grade ‘B’ Fabricated MI fittings, grooved ends. Fabricated MS structured supports. (Sketch enclosed) 4.0 Method : Floor piping test pressure : 15 Bar Risers (Low & High) and trench piping : […]
METHOD STATEMENT To INSTALL BRANCH TO PRE-INSULATED DUCTWORK The following list is the considered methodology to install branch to a section of pre-insulated ductwork.
Method Statement Title: Installation of Fan Coil Units 1.0 Scope 2.0 Purpose 2.1 Purpose of this method statement is to outline the method of storage, handling and installation of fan coil units, valve package and controls. 3.0 Materal 4.0 Method 4.1 Receiving 4.2 Storage 4.2.1 While unloading, the FCUs shall be carefully and slowly lowered to the […]
Method Statement Title: Flushing and Chemical Cleaning of Chilled Water Piping System – Supplementary SEQUENCE OF CHW SYSTEM FLUSHING
Method Statement Title: Flushing and Chemical Cleaning of Chilled Water Piping System 1.0 Scope : The scope of this method statement is to define the procedure for Flushing and chemical cleaning of chilled water piping system. Note 2.0 Material : 2.2 Chilled water piping system. 2.3 Circulation pumps. 3.0 Preparation : The following preparation […]
Method of Statement for Air and water Balancing SECTION 1 1. GENERAL REQUIREMENTS XXX Technologies, as Independent Testing & Commissioning agency will perform the Testing, Balancing and Adjusting of the HVAC System in compliance with the specified tolerance and limitations outlined with CIBSE & BSRIA standards, guidelines and with reference to project specification. Before commencement of any test, XXX Technologies […]