Method Statement Title: Installation of Fire Alarm System 1.0 Scope This method statement details the method of installation of Fire Alarm System, as per Project Specification 16721 Note A separate Method Statement Ref. ETA/MS/E- 033 shall be submitted for testing and commissioning of the Fire Alarm System. 2.0 Material 2.3 Type of FA […]
Method Statement Title: Installation of Fire Alarm System Read Post »
Method Statement Title: Installation of Cables and Wires 1.0 Scope Note: 1) Refer method statement Ref. No ETA/MS/E-005 for installation of cable trays and ladders. 2.0 Material 3.0 Applicable Location 3.1 Tower E1, E2, E3, W1, W2, W3, Podium and Villas. 4.0 Method 4.1 Storage 4.1.1 All materials received at site shall be
Method Statement Title: Installation of Cables and Wires Read Post »
1.0 Scope This method statement details the method of installation of Emergency Lighting System, as per Project Specification 16536 Note A separate Method Statement Ref. ETA/MS/E- 034 shall be submitted for testing and commissioning of the Emergency Lighting System. 2.0 Material 2.3 Type of emergency / exit luminaire shall be as per approved
Method Statement Title: Installation of Emergency Lighting System Read Post »
Method Statement Title: Installation of CO detection and Alarm System 1.0 Scope This method statement details the method of installation of CO detection and alarm system. NOTE : 1. Testing and Commissioning of CO Detection and Alarm system will be submitted separately under Ref. ETA/MS/E-007. 2.0 Material 3.0 Applicable Location and First Floor) 4.0 Method
Method Statement Title: Installation of CO detection and Alarm System Read Post »
Method Statement Title: Installation of Cable Trays and Ladders 1.0 Scope 1.1 This method statement details the method of installation of cable trays and ladders. 2.0 Material 2.1 Cable trays and ladders and accessories shall be as per approved material submittal. 3.0 Applicable Location 3.1 Tower E1, E2, E3, W1, W2, W3 and Podium –
Method Statement Title: Installation of Cable Trays and Ladders Read Post »
Method Statement Title: Installation of G.I. & PVC Conduiting on Surface 1.0 Scope : 2.0 Material : 2.2 Sizes of Conduits to be used are 20mm dia to 50mm dia. 3.0 Applicable Location : 3.3 PVC Conduits are used only false ceiling areas. 4.0 Method : 4.1.1 Conduit shall be
Method Statement Title: Installation of G.I. & PVC Conduiting on Surface Read Post »
Method Statement Title: Installation of Earthing System 1.0 Scope 1.1 This method statement details the method of installation of Earthing System as per specification section 16060. 2.0 Material 2.1 Material used for the system is as per BS : 7671 and BS : 7430. 3.0 Applicable Locations 4.0 Method 4.1 Storage 6.0 Safety 6.1
Method Statement Title: Installation of Earthing System Read Post »
Method Statement Title: Installation of Motor Control Centre ( MCC ) & Variable Frequency Drives ( VFDs ) 1.0 Scope This method statement details the method of installation of Motor Control Centres and Variable Frequency Drives, as per project Specification Sections 16472 and 15725. Note: A separate Method Statements shall be submitted for testing
1.0 Scope 2.0 Material 3.0 Applicable Location 4.0 Method 4.1 Storage 4.2 Installation 4.2.1 Ensure approved documents like shop drawing and electrical room layouts are available with the installation team. channel. pieces fallen during cable cutting and terminating process. specification requirement. 5.0 Safety 5.1 Safety Officer shall ensure that the
Method Statement Title: Installation of Capacitor Banks Read Post »
1.0 Scope This method statement details the method of installation of Lighting Fixtures as per Project Specification 16505. Note A separate Method Statement Ref. ETA/MS/E-40 shall be submitted for testing and commissioning of the Lighting Fixtures. 2.0 Material 2.3 Type of luminaries shall be as per approved shop drawings. 3.0 Applicable Location
Method Statement Title: Installation of Light Fixtures. Read Post »
