Designing a strip foundation involves creating a continuous strip of reinforced concrete to support the load of a linear arrangement of columns or load-bearing walls. Below is a detailed checklist with explanations and examples for the design of a strip foundation:
1. Site Investigation:
- Explanation: Conduct a thorough site investigation to understand soil conditions.
- Example: Perform soil tests (SPT, CPT) to determine soil properties, bearing capacity, and potential settlement.
2. Load Analysis:
- Explanation: Analyze and calculate all loads acting on the strip foundation.
- Example: Consider dead loads (structural weight), live loads, wind loads, and seismic loads to determine the total load on the foundation.
3. Soil Bearing Capacity:
- Explanation: Ensure that the soil bearing capacity exceeds the applied loads.
- Example: If the total load is 600 kN and the soil bearing capacity is 1000 kN/m², the foundation is considered suitable.
4. Settlement Analysis:
- Explanation: Analyze and limit potential settlement within acceptable limits.
- Example: If the allowable settlement is 20 mm, design the foundation to minimize settlement.
5. Strip Dimensions:
- Explanation: Determine the width, depth, and length of the strip foundation.
- Example: Design a strip foundation with a width of 1.2 meters, a depth of 0.6 meters, and a length sufficient to distribute loads effectively.
6. Reinforcement:
- Explanation: Specify the type and amount of reinforcement in the strip foundation.
- Example: Include a grid of reinforcing bars (rebar) in the foundation to enhance tensile strength.
7. Depth of Foundation:
- Explanation: Determine the optimal depth of the strip foundation for stability.
- Example: If the soil near the surface is weak, increase the depth of the strip foundation to reach more stable soil layers.
8. Column Layout:
- Explanation: Plan the layout of columns along the strip foundation.
- Example: Arrange columns in a linear configuration along the strip foundation, ensuring that loads are evenly distributed.
9. Edge and Corner Details:
- Explanation: Address edge and corner details to prevent differential settlement.
- Example: Provide thickened slab sections or use a drop panel at column locations to enhance load distribution.
10. Waterproofing and Drainage:
- Explanation: Implement waterproofing measures and ensure proper drainage.
- Example: Apply a waterproofing membrane on the foundation surface and install a drainage system along the length of the strip foundation to prevent water accumulation.
11. Construction Sequence:
- Explanation: Develop a construction sequence that ensures the stability of the strip foundation.
- Example: Excavate the foundation area, compact the soil, pour and cure concrete, and ensure proper curing to prevent cracking.
12. Quality Control:
- Explanation: Implement quality control measures during construction.
- Example: Conduct inspections at key construction stages, such as rebar placement and concrete pouring, to ensure compliance with design specifications.
13. Code Compliance:
- Explanation: Ensure compliance with local building codes and standards.
- Example: Adhere to relevant codes such as ACI 318 for concrete design or Eurocode 7 for geotechnical design, depending on the project location.
14. Professional Engineer Involvement:
- Explanation: Engage a qualified structural engineer to oversee the design.
- Example: Have a licensed structural engineer review and approve the strip foundation design to ensure it meets safety and code requirements.
15. Record Keeping:
- Explanation: Maintain detailed records of the strip foundation design process.
- Example: Document all design calculations, soil test results, construction activities, and as-built drawings for future reference and audits.
By following this checklist, engineers can ensure a well-designed strip foundation that meets structural requirements, minimizes settlement, and provides stability for the supported linear arrangement of columns or walls.
