What is Half-Mitre Corner Joint? Explain in details step by step procedure to make a Half-Mitre Corner Joint with example and application.

A half-mitre corner joint is a type of corner joint where two members meet at a 90-degree angle with each member having a 45-degree angle cut at their ends. When the members are brought together, the angled ends create a mitered joint. This joint provides a clean and aesthetically pleasing connection between the members. Here is a step-by-step procedure to […]

Study Materials 0 2 min read

What is Square Corner Joint? Explain in details step by step procedure to make a Square Corner Joint with example and application.

A square corner joint is a type of corner joint where two members meet at a 90-degree angle with square-cut ends. This joint provides a strong and rigid connection between the members. Here is a step-by-step procedure to create a square corner joint: Example Application: Square corner joints are commonly used in structural applications where two members need to be […]

Study Materials 0 2 min read

What is Full Penetration T-Joint? Explain in details step by step procedure to make a Full Penetration T-Joint with example and application.

A full penetration T-joint is a type of T-joint where the horizontal member is welded inside the groove of the vertical member, and the weld penetrates through the full thickness of the joint. This type of joint provides maximum strength and load-bearing capacity. Full penetration T-joints are commonly used in structural applications where high strength and integrity are required. Here […]

Study Materials 0 2 min read

What is Partial Penetration T-Joint? Explain in details step by step procedure to make a Partial Penetration T-Joint with example and application.

A partial penetration T-joint is a type of T-joint where the horizontal member is welded inside the groove of the vertical member, but the weld does not penetrate through the full thickness of the joint. This type of joint is suitable for applications where a complete penetration weld is not necessary, such as when the joint is not subjected to […]

Study Materials 0 2 min read

What is Fillet T-Joint? Explain in details step by step procedure to make a Fillet T-Joint with example and application.

A fillet T-joint is a type of T-joint where the horizontal member (fillet) is welded to the surface of the vertical member. The fillet weld is triangular in shape and is created by fusing the base metal with the weld metal. Fillet T-joints are commonly used in applications where the load is primarily transmitted in shear or when aesthetic appearance […]

Study Materials 0 2 min read

What is Welded T-Joint Joints? Explain in details of different types of T-Joint joints with example to application.

A welded T-joint is a type of joint where two materials are joined together in a T-shape configuration. It is commonly used when one material needs to be attached perpendicularly to another material. The T-joint provides good strength and stability when properly welded. There are different types of T-joints, including the fillet T-joint, the partial penetration T-joint, and the full […]

Study Materials 1 2 min read

What is Double Lap Joint? Explain in details step by step procedure to make a Double Lap Joint with example and application.

A double lap joint is a type of lap joint where both materials overlap each other, creating two overlapping regions on each side of the joint. This configuration increases the bonding area and provides higher strength compared to a single lap joint. Double lap joints are commonly used in heavy-duty applications where structural integrity and load-bearing capacity are crucial. Here […]

Study Materials 0 2 min read