TABLE OF CONTENTS 1.0 INTRODUCTION. 3 2.0 SCOPE OF WORKS. 3 3.0 REFERENCE DOCUMENTS. 3 4.0 DEFINITIONS AND ABBREVIATIONS. 3 5.0 ORGANIZATION & RESPONSIBILITIES. 3 6.0 RESOURCES. 5 6.1 Equipment 5 7.0 METHODOLOGY. 5 7.1 Storage. 5 7.2 Setting out 5 7.3 Unloading and shifting. 6 7.4 Installation method. 6 8.0 Quality assurance 8 9 […]
METHOD STATEMENT FOR Condensing Unit ( C.U.) INSTALLATION Read Post »
Contents: Objective Scope References Material Material Procurement, Handling and Storage Duct Fabrication Duct Installation Duct Insulation Objective This method statement provides information concerning the method of construction to ensure compliance with contract requirements, drawing, technical specification and quality control to provide a successful installation, testing, and commissioning of the of Black Steel Duct work. Scope
METHOD STATEMENT HVAC WORK Read Post »
Contents: Objective Scope References Material Material Procurement, Handling and Storage Assembly BUTT WELD PROCESS Pressure Testing Objective This method statement provides information concerning the method of construction to ensure compliance with contract requirements, drawing, technical specification and quality control to provide a successful installation, testing, and commissioning of the Installation of HDPE Domestic Pipes. Scope
METHOD STATEMENT PLUMBING WORK Read Post »
METHOD STATEMENT WIRING DEVICES SECOND FIX INSTALLATION & WIRING TERMINATION I. MATERIALS TO BE USED SWT1CHES & ACCESSARIES: 1.10A, 1 Gang, 1 Way. 250 V 2.10A, 2 Gang. 1 Way. 250 V 3.10A, 1 Gang, 1 Way, 220 V, Push button for Door Bell. 4.10A, 1 Gang. 1 Way, 220 V. Push button with label
METHOD STATEMENT WIRING DEVICES SECOND FIX INSTALLATION & WIRING TERMINATION Read Post »
METHOD OF STATEMENT FOR ELECTRIC WATER HEATER INSTALLATION Open an approved shop drawing for electric water heater location. Electric water heater to be installed should have already passed the qualification test before installation. Check and secure that all accessories and parameters are complete base on its available manual. Locate and install water heater on the
METHOD OF STATEMENT FOR ELECTRIC WATER HEATER INSTALLATION Read Post »
TV SPLITTER INSTALLATION AND WIRING TERMINATIONS MATERIAL TO BE USED:- Flush mounted TV splitter metal enclosure with size 150xl50xlOOmm manufactured by Eletra with sufficient knock outs and frame to install 2 way splitter and 6 way splitter in this enclosure. RG 6 – C5760 Coaxial Cable is installed between individual TV outlets and 6 way
TV SPLITTER INSTALLATION AND WIRING TERMINATIONS Read Post »
METHOD STATEMENT PANEL BOARD INSTALLATION AND POWER CABLE TERMINATION MATERIAL TO BE USED:- 1. PANEL BOARDS are all metallic enclosures with completely insulated bus bar, protected Neutral bars. Earth and Neutral terminal with knock outs at top and bottom removable gland plates, and with zinc coated metal sheet 1 .2mm without any welding joints and
METHOD STATEMENT PANEL BOARD INSTALLATION AND POWER CABLE TERMINATION Read Post »
METHOD OF STATEMENT FOR WATER TANK INSTALLATION 1. Summary: This section includes the following:- Approve Materials: Excavation Compaction Lean Concrete Backfilling 2. Approved Material: Underground Fiber Glass Water Tank (Capacity 13,000 Lts) 4.51m x 2.00m 2.44m x 3.12m 2.44m x 3.12m 2.44m x 3.12m Sandfilling Material 3. Excavation: Excavate the area as per
METHOD OF STATEMENT FOR WATER TANK INSTALLATION Read Post »
METHOD STATEMENT FOR UNDERGROUND WATER PIPE LINE INSTALLATION DRAWINGS : Follow approved water supply drawings. MATERIALS :a.) Approved PVC schedule 80 pipes and fittings for water lines.b.) Fine sand for sand bedding. Method of Installations:a.) Prepare approved drawings for water lines and significant materials and tools for pipe installation.b.) Excavate trenches up to required level
METHOD STATEMENT FOR UNDERGROUND WATER PIPE LINE INSTALLATION Read Post »
METHOD OF STATEMENT FOR WATER SUPPLY PIPE INSTALLATION INSIDE THE TOILET Open an approved toilet detail shop drawing. This drawing should be accompanied with the approved location of mechanical pipe sleeves for both A/C indoor unit refrigeration tubes/pipes and sanitary fixtures ventilation. Installation of pipes should be done after the block work inside the toilet.
METHOD OF STATEMENT FOR WATER SUPPLY PIPE INSTALLATION INSIDE THE TOILET Read Post »
